What does "systems integration" actually cover?

Taking a production requirement and delivering a working, integrated automation system: system design and engineering, control-panel build, robotic-cell installation, instrumentation, PLC/SCADA programming and commissioning, and tying it all into your existing line. One accountable integrator from design through to a running, verified system.

What does an automation project cost?

It is scoped and quoted per project — the cost depends on the line, the scope, the robotics and controls involved, and whether it is a new build or a retrofit, so there is no flat published rate. We quote against your actual requirement, never an invented figure.

Industrial Automation & Systems Integration — Ghana

RoboFactory Africa designs, engineers, installs and commissions industrial & factory automation — PLC/SCADA, robotic cells, controls and instrumentation, and process-automation systems integration — for manufacturers and process plants across Ghana and Togo. (To be clear: industrial factory automation integration — not consumer robotics, robotics education, or RPA software.) Since 2018. Request a consultation.

Automating a production line is an engineering and integration problem — and to be clear before anything else: RoboFactory Africa does industrial & factory automation integration (PLC/SCADA, robotic cells, controls, instrumentation, process automation) — not consumer robotics, robotics education, or RPA software. We design, engineer, install and commission automation systems for manufacturers and process plants across Ghana and Togo, since 2018. Request a consultation — or scope an automation project: +233 20 531 3333 (Togo / Francophone: +228 96 86 86 75).

What RoboFactory Africa Builds

One Integrator, Design to Commissioning

System design and engineering, control-panel build, robotic-cell integration, instrumentation and PLC/SCADA — one accountable team from architecture to a running line.

Robotic Cells on Real Lines

Palletizing, packaging, welding, material handling — robotic cells installed and integrated into your existing production line, risk-assessed and commissioned.

Controls, Instrumentation & Process Automation

PLC/SCADA control systems, instrumentation on process pipework, and process automation engineered around your production target.

Retrofit or New Build

A legacy line upgraded and a control system migrated, or a new automated line built from the architecture up.

What We Integrate

| Capability | What it covers | |---|---| | System design & engineering | Architecture, drawings, integration planning | | Robotic-cell integration | Palletizing, packaging, welding, handling | | Controls & instrumentation | Panels, sensors, transmitters, PLC/SCADA | | Process automation | Line automation engineered to the target | | Retrofit & migration | Legacy upgrade, control-system migration | | Commissioning & support | Verification, training, lifecycle support |

How Integration Works

Consult & assess — the line, the constraints, the target.
Design & engineer — control architecture + detailed drawings.
Build & integrate — panels, robotic cells, instrumentation, into your line.
Commission & verify — against the target and the safety case.
Hand over & support — operator training + lifecycle support.

What It Costs — Honestly

An automation project is scoped and quoted per project — line, scope, robotics/controls, new-build vs retrofit all drive it, so there is no flat published rate. We quote against your actual requirement, never an invented figure.

Engineered to Standard

We engineer to recognised practice — IEC 61131-3 (PLC programming), ISO 10218-2 / ISO 12100 (robot-cell & machinery safety risk assessment), IEC 61508 / IEC 61511 (functional safety / SIL where required), IEC 61439 (control panels), ISA-95 (MES integration), IEC 62443 (OT cybersecurity) — and within Ghana’s Factories, Offices and Shops Act 1970 (Act 328) / DFI safety regime
We describe these as the framework we work to, and claim a specific certification or OEM-partner badge only where it is actually held
Established 2018 — a real factory-automation integrator serving manufacturers and process plants, not a consumer-robotics or software-RPA vendor

Industrial Automation Across Ghana & Togo

We serve manufacturing, food & beverage, agro-processing, mining, packaging and industrial-plant clients across Accra, Tema, and Ghana’s industrial zones, and into Togo (Lomé) and the wider West-African industrial market — including international OEMs seeking a capable local integration partner.

Areas We Serve

RoboFactory Africa designs and integrates industrial automation across Ghana (Accra, Tema, and the industrial zones) and Togo (Lomé), serving West-African manufacturers and process plants.

Automation System Design & Engineering — the architecture phase
Robotic Installation & Integration — robotic cells on the line
Controls & Instrumentation — panels, PLC/SCADA, sensors
Process Automation — line automation to the target

Frequently Asked Questions

Is this consumer robotics or RPA software? No — industrial & factory automation on the floor: PLC/SCADA, robotic cells, controls, instrumentation, process integration. Not consumer/humanoid robots, robotics education, or RPA software bots.

What does “systems integration” cover? Design → panel build → robotic-cell install → instrumentation → PLC/SCADA → commissioning, tied into your existing line. One accountable integrator.

Which standards do you work to? IEC 61131-3, ISO 10218-2/ISO 12100, IEC 61508/61511, IEC 61439, ISA-95, IEC 62443 — and Ghana’s Factories Act 328 regime. Framework we work to; certifications claimed only if held.

What does a project cost? Scoped and quoted per project against your actual requirement — never an invented figure.